►Oversee the development and effective management of the Quality Management and completions systems ►Acts as Single Point Authority (SPA) for non-conformance reporting, and verification of corrective actions to ensure compliance with relevant systems and specifications Main responsibilities: ►Provide quality leadership and drive a proactive approach to maintaining quality and solving quality issues. Provide any support necessary to meet project quality, schedule and cost objectives. ►Supervise Facilities Construction Contractor’s QA/QC personnel and 3rd Party Inspection Contractors against Site Specific Construction execution / implementation ITPs ►Assist site Construction and Project Team in the management of the Projects and Construction Quality Management System (QMS) to ensure implementation and continuous improvement ►Develop and manage the Projects and Construction Site Specific Quality Management Plans, including, QA/QC Control procedures and site execution Inspection Test Plans (ITPs) ►Manage all site based QA/QC related stages from Material receipt at site through to RFSU ►Assist in Developing the Asset Inspection and Testing Philosophy/Strategy in line with Industry Best practices. ►Support the MOC Process to ensure both technical and commercial compliance with Project Expectations ►Assist Project Construction Management in the Development and implementation of a Projects specific CCMS System (Computerized Completions Management System) Manage the system with discipline assistance to ensure a smooth and Auditable ►Hand over process from Mechanical Completion through to RFSU and Hand over acceptance by Asset Management. ►Assist in the development and implementation of an agreed set of Equipment applicable, Mechanical Completion and Pre-commissioning Inspection Test Records to support Project ITPs and Asset Handover Certification requirements ►Maintain a tracking system to monitor the status of Facilities Construction Contractors NCRs ►Maintain and Manage Welding and Test Equipment Calibration logs and Welder Qualification Logs. ►Develop the specifications for Contract Quality Plans and Manuals relevant to the Contracts awarded within the Projects. ►Review the Construction Contractors Quality requirements for the pre-qualification and tendering exercises and assist in the evaluation of the Bidders’ Quality systems. ►Monitor and ensure maintenance of project quality standards during construction, installation, commissioning and initial operations of the facilities. Actively engage in planning and work management, together with the Contractor’s QA/QC departments at project sites. ►Technically support and manage the Construction Contractor’s site QA/QC personnel assigned to the site Teams, in the various site locations ►Manage and report on findings and repair requirements found during execution of Project specific ITPs. ►Co-ordinate the review and acceptance of Contractor’s Quality records and certification, and ensure that they provide evidence of compliance. ►Review and acceptance of Project/Supplier Data Requirements (PDRL / SDRL / VDRL) of data and documentation throughout Project life through to Final hand-over to Operations ►Drive continuous improvement of the Site Specific Quality Management System and prepare management reviews and reports on Site Specific QMS aspects and QA/QC issues. ►Prepare QA/QC input & data to the monthly Project Progress Reports for Management, including KPI development and measurement relating to Corporate and Project Quality Assurance. ►Assist in generation /review of supplier ITP requirements ►Perform other tasks as requested in support of Projects and Operations activities and objectives ►Proven level of competency and execution in Non-destructive testing methods, including but not limited to: UT, Radiography, X-Ray, Hydro-testing, Nitrogen Testing and Acoustic Testing.

►Oversee the development and effective management of the Quality Management and completions systems ►Acts as Single Point Authority (SPA) for non-conformance reporting, and verification of corrective actions to ensure compliance with relevant systems and specifications Main responsibilities: ►Provide quality leadership and drive a proactive approach to maintaining quality and solving quality issues. Provide any support necessary to meet project quality, schedule and cost objectives. ►Supervise Facilities Construction Contractor’s QA/QC personnel and 3rd Party Inspection Contractors against Site Specific Construction execution / implementation ITPs ►Assist site Construction and Project Team in the management of the Projects and Construction Quality Management System (QMS) to ensure implementation and continuous improvement ►Develop and manage the Projects and Construction Site Specific Quality Management Plans, including, QA/QC Control procedures and site execution Inspection Test Plans (ITPs) ►Manage all site based QA/QC related stages from Material receipt at site through to RFSU ►Assist in Developing the Asset Inspection and Testing Philosophy/Strategy in line with Industry Best practices. ►Support the MOC Process to ensure both technical and commercial compliance with Project Expectations ►Assist Project Construction Management in the Development and implementation of a Projects specific CCMS System (Computerized Completions Management System) Manage the system with discipline assistance to ensure a smooth and Auditable ►Hand over process from Mechanical Completion through to RFSU and Hand over acceptance by Asset Management. ►Assist in the development and implementation of an agreed set of Equipment applicable, Mechanical Completion and Pre-commissioning Inspection Test Records to support Project ITPs and Asset Handover Certification requirements ►Maintain a tracking system to monitor the status of Facilities Construction Contractors NCRs ►Maintain and Manage Welding and Test Equipment Calibration logs and Welder Qualification Logs. ►Develop the specifications for Contract Quality Plans and Manuals relevant to the Contracts awarded within the Projects. ►Review the Construction Contractors Quality requirements for the pre-qualification and tendering exercises and assist in the evaluation of the Bidders’ Quality systems. ►Monitor and ensure maintenance of project quality standards during construction, installation, commissioning and initial operations of the facilities. Actively engage in planning and work management, together with the Contractor’s QA/QC departments at project sites. ►Technically support and manage the Construction Contractor’s site QA/QC personnel assigned to the site Teams, in the various site locations ►Manage and report on findings and repair requirements found during execution of Project specific ITPs. ►Co-ordinate the review and acceptance of Contractor’s Quality records and certification, and ensure that they provide evidence of compliance. ►Review and acceptance of Project/Supplier Data Requirements (PDRL / SDRL / VDRL) of data and documentation throughout Project life through to Final hand-over to Operations ►Drive continuous improvement of the Site Specific Quality Management System and prepare management reviews and reports on Site Specific QMS aspects and QA/QC issues. ►Prepare QA/QC input & data to the monthly Project Progress Reports for Management, including KPI development and measurement relating to Corporate and Project Quality Assurance. ►Assist in generation /review of supplier ITP requirements ►Perform other tasks as requested in support of Projects and Operations activities and objectives ►Proven level of competency and execution in Non-destructive testing methods, including but not limited to: UT, Radiography, X-Ray, Hydro-testing, Nitrogen Testing and Acoustic Testing.

Performing QA/QC inspection activities. ►Performing inspection activities relating to. ►Taking all responsibility for the integrity inspections carried out on client sites and assign duties to inspection personnel as necessary. ► Prepare weld maps for tanks. ►Review and approve written inspection procedures like RT,MT,UT,PT, Pneumatic test,vaccum box test,PWHT,hardness test and welding consumable control procedure, weld repair procedure, project QA plan. ►Troubleshoot any integrity inspections problem, assures that equipment and materials are properly maintained for efficient operations and reports equipment problems to QA/QC manager. ►Interpretation of Radiographic films according to ASME ANSI B31.3 & ASME Sec 9,API 650, ASME SEC VIII. ►Witnessing Hydraulic testing, witnessing RT, MT, UT, PT, hardness testing jobs as well as evaluation of discontinuities for different types of metals and weld joints by RT, MT, UT, PT. ►Reviewing of reports according to specification and approving it. ►Witnessing Welders Qualifying test and qualifying welders for different base metals, thickness and diameter ranges according to ASME Section IX. ►Qualification of welders as per ASME Section IX. ►Checking joints fit up to rectify any mismatch, checking joint fit ups, root and surface of joint and rectify. ►Visual inspection of welds. ►Coordination of NDT activities like RT, MT, UT, PT and evaluation of discontinuities

Working as a onshore integrity and inspection support, worked for the companies like ExxonMobil, chevron, Shell, Total. ►Preparing procedures for various NDT methods like RT, MT, UT and PT and PWHT. ►Taking all responsibility for the integrity inspections carried out on client sites and assign duties to inspection personnel as necessary. ►Review and approve written inspection routines and to train and coach in house inspection personnel when available. ►Prepare reports as per API510, API570 for pressure vessels & piping’s and other documentation required to support the integrity inspections operational function. ►Troubleshoot any integrity inspections problem, assures that equipment and materials are properly maintained for efficient operations and reports equipment problems to operations manager. ►Preparing welding procedure. ►Interpretation of Radiographic films according to ASME ANSI B31.3 & ASME Section V for process piping & refinery construction. ►Witnessing Hydraulic testing, witnessing RT, MT, UT, PT, hardness testing jobs as well as evaluation of discontinuities for different types of metals and weld joints by RT, MT, UT, PT. ►Reviewing of reports according to specification API510 & API570 and approving it. Witnessing procedure qualification record welding test according to WPS, Witnessing Tensile and ►Hardness test for procedure qualification record from third party and approving procedure qualification record according to ASME Section IX. ►Witnessing Welders Qualifying test and qualifying welders for different base metals, thickness and diameter ranges according to ASME Section IX. ►Reviewing the PWHT charts cooling rate, heating rate, soaking period according to specification and approving the charts. ►Reviewing the Hardness reports according to specification and approving it. ►Qualification of welders as per ASME Section IX. ►Checking joints fit up to rectify any mismatch, checking joint fit ups, root and surface of joint and rectify. ►Visual inspection of welds.