Supervises and coordinates the civil -mechanical activities of construction contractors within the areas assigned to them. Ensures verification checks and records to ensure BP management and supervision provide safe working conditions and permitting procedures, protective equipment, experienced/qualified supervision and workforce, with reliable, well-maintained equipment to carry out contract work in accordance with contract schedule and goals. Examines, verifies, reviews and confirms the scope of work for the discipline in accordance with the relevant contract claim to provide assurance that contractors correctly interpret and comply with the latest revision of construction drawings, cost estimates and specifications. Performs the duties of a responsible person at the site in accordance with Safety Instructions -105. Ensures compliance with safety regulations and safe work practices at the work execution phase. Interacts with various stakeholders such as TCO Operations, Quality Assurance / Quality Control, Project Engineers, etc. Performs other tasks as assigned and directed by the Team Leader

Managing a team of workers in the construction of piping systems, pipelines, and related equipment. Conducting daily site inspections to ensure all piping construction activities comply with established safety protocols, company policies, and local regulations. Collaborating with other stakeholders, including project managers, field engineers, and contractors, to ensure successful completion of construction plans. Tracking construction progress and reporting any delays or issues to the project manager. Ensuring proper construction materials and equipment are available and used correctly. Developing and implementing project specific safety plans. Coordinating with third-party inspection agencies to ensure effective inspection and testing of completed works. Routinely study, check, review and validate the discipline scope of work against the appropriate Contract Requisition to ensure the Contractors correctly interpret and comply with the latest revision P&ID drawings and the latest isometric drawings. Control aboveground and underground piping/structural works, quantities, and specifications. Perform duties of PIC in field in accordance with SI-105. Strong safety awareness and adherence to safe working practices during site execution phase. Perform other tasks upon request from the Construction Superintendent. Work with BB and another group FGP.

3GI FGP/WPMP Welding inspector – ME&I, Kazakhstan Tengiz Oil Field Tengiz plant. Key Responsibilities: Oversaw all activities to promote compliance to the Site Quality Plan, and ITP’s Reviewing piping and instrumentation diagrams (P&IDs) and isometric drawings to ensure compliance and identify potential issues. quality of work in accordance with the Site Quality Plan, contractor’s method statements, and inspection and test plans. Delivered coaching and mentoring to the contractor on manual/orbital welding of P22 and F22 PQRS and then qualifying the welders to approved WPS Autonomously approved vendor supplied documents, QC records Scheduled Vendor Inspections and conducted approval of Vendor Certification Data Dossiers Continuous evaluation of all EPC contractors’ deliverables such as quality plans, inspection and test plans, method statements, procedures, specifications, materials supply and certification, trade tests, third party inspections prior to work commencing

Report to QC Coordinator and/or Quality Lead Inspector and has responsibility to conduct inspections of in process and completed work, installations and testing to ensure compliance with project design specifications and drawings in a timely manner. Reviewing piping and instrumentation diagrams (P&IDs) and isometric drawings to ensure compliance and identify potential issues. Witness Welder Qualification Testing Survey the Subcontractors laydown areas and material mechanical handling of free issued material Witness Joint fit-up, Checks WPS and Welders Qualifications, Checks electrodes, weld process and pre-heat are consistent with WPS. Review electrode handling procedures and inspects storage and baking area for electrodes to ensure that manufacturer’s instructions are being followed. Perform Welding audit, checking that heat input values and inter pass temperatures are maintained during the welding cycle. Visually Inspect the final weld, witnesses dimension checking, Confirms NDE clearance per isometric Witness hydrotests, leak test as appropriate Perform walk-downs and document results to ensure compliance with project specifications and procedures. Verifying the documentation for certification and as-builts. Develop and publish NCRs and to identify and gain resolution of discrepancies observed during construction phase.

Inspection during fabrication of pipe spools and pipe supports at shop and field. Conducting PQR Qualification and welder qualification test. Reviewing piping and instrumentation diagrams (P&IDs) and isometric drawings to ensure compliance and identify potential issues. Witness & review the PWHT and NDT reports. Interpret the Radiography films and reports. Witness and monitoring of hydro testing. Witness & Monitoring of Bolt Tightening activities on Piping. Material inspections and verifications with certificates and project specifications. Prepare and summit the work completion report to the Manager. Inspection of installation of all HVAC equipment.

Visual Inspection and reporting of piping weld joints for materials like CS, SS, Alloy Steel, Cu-Ni & Inconel of different sizes (0.5 inch to 72 inches) as per ASME B31.3 standard. Identify and report all quality concerns, to the lead inspector. Reviewing piping and instrumentation diagrams (P&IDs) and isometric drawings to ensure compliance and identify potential issues. Keep a record of each activity performed on daily basis. Monitor contractor are compliance with established HSE rules, standards and procedures. Verify construction activities are carried out with respect to project requirements, ensure all are activities are in line with approved documents. HVAC (Heating Ventilation and Air Conditioning System): Inspection the system installation during construction to check conformity with plans and specifications. Installation and reinstatement after testing Pressure Vessels and Heat Exchangers Fabrication and installation the Structure Carry out physical inspection of all piping/mechanical installations. Ensure that all activity is completed in accordance with project requirements. Approved design international industrial codes standards, and procedure Review and signing of daily inspection reports/checklists with respect to approve. Inspects materials, products, and work in progress for conformance to specifications, and adjusts process or assembly equipment to meet standards. Inspection Test Plans Material incoming inspection (Pipes, Fittings and Valves) Control of traceability and surface damage Monitor process / utility piping tie-ins and crossing works are following the established procedures and ensure all NDT examinations have been performed properly. ASME B31.3, 31.4 and 31.8, ASME V, IX,

To monitor, inspect and report on all mechanical works on WA’s to ensure compliance with specifications. Electrode control – particular attention paid to the control and storage of low-hydrogen electrodes. Visual inspection of completed welds. Monitoring of pipeline front-end welding activities including but not limited to. Checking that correct WPS in use. Checking of pipe bevel irregularities/damage and joint set-up prior to welding. Checking the condition of welding electrodes. Monitoring of tie-in / special crossing / repair welding activities as above. Monitoring of pipe stringing activities to ensure correct support and coating protection. Monitoring post weld heat treatment activities (PWHT) Monitoring of pipe bending activities. To observe the requirements of applicable inspection and test plans and to sign off such plans and associated checklists in accordance with predetermined intervention annotations.

Control of all QA\QC documentation & compilation of work packages for client Inspection FIT-UP of Tubing Isometry Visual Inspection of welds, writing daily welding report QC welding database, control of percentage barrier, rejection rates Verification of test on welding (MT, PT, PWHT, Hardness) and its control Monitoring percentages of non-destructive testing in accordance with specifications and welding procedures Inspection of structural welding: mapping, control of dimensions according to drawings Check P&ID drawings and latest isometric drawings. Monitoring of above ground and underground welding operations Draw as built (for executive documentation) Hydrostatic and pneumatic test: completing of corresponding documentations, control. according to SNiP and VSN standards Monitoring punch-list of incomplete work Turnover documentation of executed work Control of necessary tests by line qualification Material inspection (Pipes, Fittings and Valves) Control of traceability and surface damage Inspection of test performed for turnaround completion.