• Experienced in the selection, specification, configuration, testing and maintenance of safety instrumented systems following ISA / ANSI -84. 00. 01 and IEC 61508/ 61511-1, NFPA 85 / 86 • Experience with Process Hazard Analysis (PHA) and Layer of Protection Analysis (LOPA) process • Refining process knowledge strong understanding of process units and business drivers • Experience and knowledge of instrument and control systems through design and field installation • Has the knowledge of the development of all SIS Functional Safety and SIS related deliverables including Functional Safety Plans, LOPA calculations, response time calculations, SIL verification calculations, safety requirements specifications, alarm specification for SIS /IPL, Cause and Effect diagrams, system block diagrams, logic narratives, and function / logic block diagrams • Thorough understanding of P&ID symbology and presentation techniques • Experience in SIS hardware inspection, FAT, SAT, loop checks, start-up and commissioning • Ability to program and trouble-shoot SIS logic solver programs, preferably Honeywell FSC / SM and Invensys TriStation • SPI (Intools) experience • SAP experience • Mechanical Integrity and Process Safety Management (PSM) knowledge • Demonstrates strong desire to use problem-solving skills • Ability to develop conceptual thinking to the point of practical applications, and an ability to implement these applications in the field • Knowledge of instrument maintenance practices • Demonstrated working knowledge of instrumentation technical standards, principles, theories, concepts, and techniques • Familiar with continuous process control. • Knowledge of hazardous area approvals. • Exposure to Instrumentation sizing tools and software. • Familiar with instrumentation calibration and calibration strategies. • Management of change experience. • Ability to troubleshoot a range of automation and instrumentation systems. • Serve as plant champion of instrument safety issues, resolving questions and issues through familiarity with industry, governmental, and plant safety standards. • Instrument Mechanical Integrity (MI) regulatory compliance • Technical development and mentorship and of other employees • Responsible for development and management of procedures for safe and reliable start-up • Functional Safety Assessments • Participate and facilitate Functional Safety Assessment, LOPA / SIL assignment review meetings • Assist in implementing and maintaining reliability programs and processes: Defect elimination, Event Code Metrics, Predictive/Preventive Maintenance Plans, Criticality Analysis, SIS and associated metrics. • Process Hazards Analysis (PHA) / Layer Of Protection Analysis (LOPA) support • Provide input for Turnaround preparation • Familiarity with SIL Calculations and models • Experience developing and interpreting Fault-Tree Analysis • Assist with training and development of operators, technicians, and engineers in order to improve skill-sets with respect to LOPA and Safety Instrumented Systems (SIS) • Assist in training and development of Instrument Reliability Specialists and Technicians and SIS/PES Specialists and Technicians. • Drives company core values, including ethics, safety, environmental leadership • Accepts ownership, is accountable and delivers on commitments • Establishes priorities and develops critical tasks • Must have strong team-building skills with ability to build teams across organizational lines. • Provide leadership for implementation of reliability systems. • Assist and complete MOC s, P&ID s, PHA s as they relate to SIS Instrumentation. • Adopt and share instrument systems best practices through internal and external networking. Networks/Teams Include: • Field Instrument Network (FIN) • Participate as site Team Member for the Field Instrument Network (FIN) and PHA / SIS / LOPA sub-team. • Providing technical training to the instrumentation technicians in the area. • Supporting the development of instrumentation reliability and maintenance procedures Experience and knowledge of instrument and control systems through design and field installation

Provides Electrical discipline specific technical, planning and execution management support to the Commissioning Manager. • Managing all activities within the matrix organisation jointly and in collaboration with other Discipline Leads and the Commissioning Manager. • Provide Discipline technical leadership and expertise to the core commissioning team and at Engineering and Construction interfaces. • Support each Area and the team at the interface and Turnover from Construction at Mechanical Completion and at Handover of Commissioned Systems to Operations. • Ensuring that equipment and systems are fully commissioned at Handover, and ready to operate in compliance with the Project design, standards and specifications, the Systems Completion Plan and Control Procedures. • Direct ownership and execution management of all specialist and discipline specific Static & Dynamic Commissioning resulting in Handover to Operations and providing assistance in Start-Up and Acceptance Testing efforts. • Supports the Commissioning Superintendents in working with Start Up as one integrated team from commissioning to initial plant operation, ensuring a smooth transition to Operations and acceptance of the facilities. • Identifies and manages discipline commissioning resource needs, tools, test equipment, plant, spares etc. • Ensure the right resource levels and technical skills are assigned to meet each Area's schedule and commissioning execution requirements • Managing and directing core Electrical discipline teams of commissioning supervisors and technicians, vendors and specialist subcontractors/ third party personnel across all plant areas (as well as at SITs and SAT's). • Ensures appropriate Commissioning, and Handover documentation is completed correctly and comprehensively. • Review and supports development of discipline Commissioning Plans and Schedules, Level 3 and Level 5 for the assigned plant Area and activities. • Manages execution discipline activity against these plans and schedules to ensure a safe and effective completion of commissioning phase and transition of systems to steady state operations. • Support maintenance of the Systems Completion Database and Planning interface for MC and Commissioning progress tracking, reporting certification, and quality purposes. • Progress and productivity reporting against the Area schedules and performance metrics including the completion of daily timesheets, productivity sheet. • Support development of Commissioning (Static & Dynamic) Management Procedures, Systems Acceptance Procedures/Progress Monitoring, Turnover and Completion Packages, and provide input to Start-up and Operating Procedures. • Responsible for Safety and Environmental controls for activities in all buildings, systems and zones within their areas of activity under Care, Custody and Control (support from HSE team).

Duties: Participated to coordinate with project manager and administer efficient working of construction process and monitor lifecycle of all projects and prepare all project controls and update as per requirement and document all processes.. Participated providing technical support to all management processes and maintain and update all logs and document all estimates and change orders for vendors and perform quantity survey with help of different software and maintain compliance to an efficient project schedule. Have experience in preparation physical layout for all construction projects and coordinate with project manager to administer and maintain all contracts and purchase orders and prepare an effective work schedule. Walkdown, Oversee all engineering processes in construction projects and provide subject matter expertise as per requirement and perform regular tests on procedure to ensure compliance to all regulations and evaluate all designs and drawings before implementation.. Participated to Identify and resolve all technical issues in construction process prepare an effective schedule and prepare appraisal reports to be submitted to construction manager and procure materials to prepare an effective construction schedule. Manage and ensure all materials in compliance with required quality for all projects and prepare reports for all final project turn over and maintain records of all construction procedures and prepare progress reports for same. Design and maintain all construction technical catalogs and prepare supplier data and interpret all contract plans and specification and coordinate with all contractors to resolve issues in processes. Maintain knowledge on all contract terms and legal requirements for all construction projects to avoid any delay in projects and provide support to all work groups and participate in various actively to ensure completion for all projects. Evaluate all projects and recommend various cost savings methods for same and organize and attend various staff meetings on weekly basis. Functions as the central point of contact between the Systems Completion and Operations & Maintenance organizations with a focus on coordinating resource availability to support SC-scheduled walkdowns.  Participates in interface meetings, including Blue Zone and walkdown meetings, to align team on walkdown activities and expectations.  Proactively review schedule of planned walkdowns along with required resources to identify conflicts and works to resolve any misalignments with other work plans.  Communicate with Operations personnel or timing limitations to the Systems Completion organization ahead of time to ensure efficient use of resources and appropriate adjustment to walkdown plans.  Maintains open communication with Event Manager and provides regular status updates. Escalates items for resolution as appropriate.  Align WD members on Punchlist/Exception procedures and WD expectations; maintain consistency and transparency in the process.  Champions Safety In Designs (SID) efforts to ensure facilities are completed in accordance with SID guidelines and exceptions captured and tracked to closure.  Supports post WD processes and secondary validation to maintain integrity of quality management. Champions PLI verification, closure and closure. Proactively organizes informal walkdowns involving Operations and Maintenance personnel to conduct site checks ahead of formal SC schedule walkdowns to streamline process  Regularly performs site validation of systems to evaluate readiness for formal planning and provide feedback to Systems Completion on identified areas of that can affect the formal group walkdown.  Reviews Lessons Learned information to ensure that it is being appropriately applied where applicable.  Provides feedback to add any new Lessons Learned into database to improve overall organization  Develops collaborative relationship with Operations and Maintenance organizations  Actively participates in team meetings and shares knowledge and experiences with other members to facilitate common understanding . Suggests process improvements where applicable.  Cooperates with other FGP/TCO departments, third party companies, clients and etc. to ensure the safety and integrity of reliable operation of department assets in compliance with project requirements and relevant RoK laws and regulations; Acts as a Leader in Safety and Environmental Protection.  Contributes to systematic management of Health, Environment and Safety, reliability and productivity aiming to reach world-class indicators and support TCO Operational Excellence Strategy.  Participates/Leads safety meetings.  Conduct Safety audits (LWA, PTW, routine duties, LOTO, etc.).  Participates in IIF and BBS programs.   Proactively uses Stop Work Authority upon observing unsafe behaviours or situations. Working as part of a team performing systemization and tag data validation on engineered documents to establish the completions subsystem boundaries and populate the MCPlus completions database. Systemization: Highlighting the engineered documents across the entire project area and mark out the different subsystems, ensuring that every boundary is correct as per the project systemization philosophy. Reviewing multiple document disciplines (electrical, instrumentation, mechanical, HVAC, etc) and cross referencing all the documents to properly establish the subsystems across the various document types. Tag data validation: Verifying every required document and pulling the tag info to be entered into a data table for upload into MCPlus. Identifying engineering issues and raising RFIs as required Ensuring that all data is 100% accurate and the local copies (in Excel, Access) are properly maintained Working independently, able to complete a large number of tasks with minimal supervision. Searching out for any other documents related to the scope to ensure that all documents are validated and systemized with no gaps. Cross referencing many different sources of data (DCN register, Tie Ins register, etc) to ensure completeness and accuracy

• Turnaround (planning & execution & validation) & Site Maintenance Support • Develop Work Pack WBS and verify the documentation requirement for work pack preparation. • Identify requirement of manpower for some discipline (instrument, electrical, mechanical) and additional vendor support. • Participated in TurnAround2019 scope planning, and provide TA justification and drivers for scope • Identify & develop required resources, tools, parts, contracts, logistics, and specialized procedures • Support to O&M team for rationalization of spare part for Instrumentation • Have experience with the line to define the Instrumentation spares requirement, participate in the QA/QC of electrical SPIL-forms and their coding and conversion to Company e-SPIR forms including to take accountability for the population of the data into the CMMS system. • Ensuring compliance with (Republic of Kazakhstan) legislative requirements with regards to Instrumentation selected and Equipment maintenance strategy in the CMMS Build. • Providing support to the Contracts & Procurement department regarding purchasing spare parts for instrumentation • Have experience in Metrology Optimization process to allow reduce number of instruments requiring state verification and move them to Indicators. • Participated in the asset register verification process for instrumentation • Participated in enhance Preventative Maintenance strategies to remove duplication and assign support resources • Work with Metrology team to identify where testing procedures can be simplified, and streamlined to reduce the workload • Support metrology with justifications and data related conditioned based results, to optimize test intervals. • Providing regular support to field maintenance teams of onshore and offshore assets • Researching obsolete parts and develop alternatives or strategies to maintain assets. • Estimate man-hour as per company norms required for job card preparation and advise Project and Planning engineer. • Identify all procedures required for construction i.e. lifting etc., • Overseeing contractors involved in work preparation, walk-downs, execution, and acceptance of work • Support to execution, troubleshooting, and resolution of conflicts • Engineering Design, Projects, and Management of Change • Designing, engineering, construction and commissioning modifications and projects to appropriate technical and RoK standards • Assistance to the management of technical interfaces with contractors and vendors • Ensure high-quality critical as-built documents and drawings related to the discipline for Company assets and for all projects • Preparation of Workpacks, prepare job card for all discipline such as civil & structural, mechanical, piping, electrical, instrumentation etc. • Have experience with CMMS Build and Asset Integrity-Process Safety Management standard for all Instrumentation, SCE identification, • Definition, Updating and localization maintenance strategies for Instrumentation equipment according to RoK requirements and vendors recommendations • Reviews 1/3/6 Weekly Lookaheads (WLA) and drives B Check Sheets to completion for assigned scope (SIS/PCS/FGS) maintaining alignment with the overall commissioning execution plan. • Focal point for all Instrument pre-commissioning activities on site, including spares, tools, advice, mentoring, best practices to achieve milestone goals in line with schedule, skyline, fishbone and plan. • Liaise with subcontractor to verify / conduct / complete / sign all verification documentation for dossier handover for pre-commissioning phase of the project. • Liaise with vendors to support and complete all 3rd party supplied equipment checks at B-Check Sheet phase of the project. • Work closely with our construction contractors to achieve milestones aligned with the plan. Assist as required to elevate and disseminate resources as required in this space. • Confirm Instrument system design meets project specification requirements. • Support troubleshooting and where necessary prepare technical queries in the form of RFI (Request for Information). • Reviews 1/3/6 Weekly Lookaheads (WLA) and drives B Check Sheets to completion for assigned scope (SIS/PCS/FGS) maintaining alignment with the overall commissioning execution plan. • Focal point for all Instrument pre-commissioning activities on site, including spares, tools, advise, mentoring, best practices to achieve milestone goals in line with schedule, skyline, fishbone and plan. • Liaise with subcontractor to verify / conduct / complete / sign all verification documentation for dossier handover for pre-commissioning phase of the project. • Liaise with vendors to support and complete all 3rd party supplied equipment checks at B-Check Sheet phase of the project. • Work closely with our construction contractors to achieve milestones aligned with the plan. Assist as required to elevate and disseminate resources as required in this space. • Confirm Instrument system design meets project specification requirements. • Support troubleshooting and where necessary prepare technical queries in the form of RFI (Request for Information). • Reviews 1/3/6 Weekly Lookaheads (WLA) and drives B Check Sheets to completion for assigned scope (SIS/PCS/FGS) maintaining alignment with the overall commissioning execution plan. • Focal point for all Instrument pre-commissioning activities on site, including spares, tools, advise, mentoring, best practices to achieve milestone goals in line with schedule, skyline, fishbone and plan. • Liaise with subcontractor to verify / conduct / complete / sign all verification documentation for dossier handover for pre-commissioning phase of the project. • Liaise with vendors to support and complete all 3rd party supplied equipment checks at B-Check Sheet phase of the project. • Work closely with our construction contractors to achieve milestones aligned with the plan. Assist as required to elevate and disseminate resources as required in this space. • Confirm Instrument system design meets project specification requirements. • Support troubleshooting and where necessary prepare technical queries in the form of RFI (Request for Information). • Reviews 1/3/6 Weekly Lookaheads (WLA) and drives B Check Sheets to completion for assigned scope (SIS/PCS/FGS) maintaining alignment with the overall commissioning execution plan. • Focal point for all Instrument pre-commissioning activities on site, including spares, tools, advise, mentoring, best practices to achieve milestone goals in line with schedule, skyline, fishbone and plan. • Liaise with subcontractor to verify / conduct / complete / sign all verification documentation for dossier handover for pre-commissioning phase of the project. • Liaise with vendors to support and complete all 3rd party supplied equipment checks at B-Check Sheet phase of the project. • Work closely with our construction contractors to achieve milestones aligned with the plan. Assist as required to elevate and disseminate resources as required in this space. • Confirm Instrument system design meets project specification requirements. • Support troubleshooting and where necessary prepare technical queries in the form of RFI (Request for Information). • Reviews 1/3/6 Weekly Lookaheads (WLA) and drives B Check Sheets to completion for assigned scope (SIS/PCS/FGS) maintaining alignment with the overall commissioning execution plan. • Focal point for all Instrument pre-commissioning activities on site, including spares, tools, advise, mentoring, best practices to achieve milestone goals in line with schedule, skyline, fishbone and plan. • Liaise with subcontractor to verify / conduct / complete / sign all verification documentation for dossier handover for pre-commissioning phase of the project. • Liaise with vendors to support and complete all 3rd party supplied equipment checks at B-Check Sheet phase of the project. • Work closely with our construction contractors to achieve milestones aligned with the plan. Assist as required to elevate and disseminate resources as required in this space. • Confirm Instrument system design meets project specification requirements. • Support troubleshooting and where necessary prepare technical queries in the form of RFI (Request for Information). • Reviews 1/3/6 Weekly Lookaheads (WLA) and drives B Check Sheets to completion for assigned scope (SIS/PCS/FGS) maintaining alignment with the overall commissioning execution plan. • Focal point for all Instrument pre-commissioning activities on site, including spares, tools, advise, mentoring, best practices to achieve milestone goals in line with schedule, skyline, fishbone and plan. • Liaise with subcontractor to verify / conduct / complete / sign all verification documentation for dossier handover for pre-commissioning phase of the project. • Liaise with vendors to support and complete all 3rd party supplied equipment checks at B-Check Sheet phase of the project. • Work closely with our construction contractors to achieve milestones aligned with the plan. Assist as required to elevate and disseminate resources as required in this space. • Confirm Instrument system design meets project specification requirements. • Support troubleshooting and where necessary prepare technical queries in the form of RFI (Request for Information). • Reviews 1/3/6 Weekly Lookaheads (WLA) and drives B Check Sheets to completion for assigned scope (SIS/PCS/FGS) maintaining alignment with the overall commissioning execution plan. • Focal point for all Instrument pre-commissioning activities on site, including spares, tools, advise, mentoring, best practices to achieve milestone goals in line with schedule, skyline, fishbone and plan. • Liaise with subcontractor to verify / conduct / complete / sign all verification documentation for dossier handover for pre-commissioning phase of the project. • Liaise with vendors to support and complete all 3rd party supplied equipment checks at B-Check Sheet phase of the project. • Work closely with our construction contractors to achieve milestones aligned with the plan. Assist as required to elevate and disseminate resources as required in this space. • Confirm Instrument system design meets project specification requirements. • Support troubleshooting and where necessary prepare technical queries in the form of RFI (Request for Information). • Reviews 1/3/6 Weekly Lookaheads (WLA) and drives B Check Sheets to completion for assigned scope (SIS/PCS/FGS) maintaining alignment with the overall commissioning execution plan. • Focal point for all Instrument pre-commissioning activities on site, including spares, tools, advise, mentoring, best practices to achieve milestone goals in line with schedule, skyline, fishbone and plan. • Liaise with subcontractor to verify / conduct / complete / sign all verification documentation for dossier handover for pre-commissioning phase of the project. • Liaise with vendors to support and complete all 3rd party supplied equipment checks at B-Check Sheet phase of the project. • Work closely with our construction contractors to achieve milestones aligned with the plan. Assist as required to elevate and disseminate resources as required in this space. • Confirm Instrument system design meets project specification requirements. • Support troubleshooting and where necessary prepare technical queries in the form of RFI (Request for Information). • Have experience with create Functional Locations hierarchy for all Instrumentation, Control and Automation equipment • Able to interpret company procedure, specification. • Able to read the engineering drawing (fabrication, erection, GA, plot plan etc.,), P&ID, PFD and other design and construction requirement • Able to identify the construction challenges may come up during execution • Able to review design documents and provide constructability inputs to design. Special experience: SAP, ROSER, AutoCAD, Microstation, Nawiswork, AdobeAcrobat Pro Work with OEM: Emerson, ABB, Siemens, Krohne, AllenBradly, Foxboro, Schneider Electric, Valve Italia, Gabionetta, GoreltEx, Boehmer Armatura, etc.

• Responsible for the Inspection and testing of E&I Installations as per Client Drawings Specifications. Conduct site QA/QC. • Surveillance inspections, Prepare and Review Field Inspection/Surveillance reports. • Prepare Internal Punch lists. • E&I Material inspections as per Client/Project requirements. • Review and maintain calibration and Test records for testing equipment’s at site. Procedures STDs etc.. • Process concession requests and non-conformance reports. • Monitor Quality control activities and train workforce where requirements are found. • Liaison with client QC representative, • Development of ITP’s, and Procedures, • Monitors ongoing construction activities to ensure that installation is carried out as per client and ROK standards. Special experience: Ability to program and trouble-shoot SIS logic solver programs,Experience in SIS hardware inspection, FAT, SAT, loop checks, start-up and commissioning, Oil and Gas Preparation Field, Electric installation work, Installation of Instrumentation and Control system. Hardware and Software Devlopment Siemens S7, Emerson Delta V. HART, FLUKE 1550B, FLUKE loop calibrator, FLUKE 1587, FLUKE 1625, LRCD 210, DRUCK, SONEL MMR-600, АИП 70, work with testing and calibration tools Work with OEM: Emerson, ABB, Siemens, Yakagawa, AllenBradly, Schneider Electric, etc. • Reviews 1/3/6 Weekly Lookaheads (WLA) and drives B Check Sheets to completion for assigned scope (SIS/PCS/FGS) maintaining alignment with the overall commissioning execution plan. • Focal point for all Instrument pre-commissioning activities on site, including spares, tools, advise, mentoring, best practices to achieve milestone goals in line with schedule, skyline, fishbone and plan. • Liaise with subcontractor to verify / conduct / complete / sign all verification documentation for dossier handover for pre-commissioning phase of the project. • Liaise with vendors to support and complete all 3rd party supplied equipment checks at B-Check Sheet phase of the project. • Work closely with our construction contractors to achieve milestones aligned with the plan. Assist as required to elevate and disseminate resources as required in this space. • Confirm Instrument system design meets project specification requirements. • Support troubleshooting and where necessary prepare technical queries in the form of RFI (Request for Information). • Responsible for the Inspection and testing of E&I Installations as per Client Drawings Specifications. Conduct site QA/QC. • Surveillance inspections, Prepare and Review Field Inspection/Surveillance reports. • Prepare Internal Punch lists. • E&I Material inspections as per Client/Project requirements. • Review and maintain calibration and Test records for testing equipment’s at site. Procedures STDs etc.. • Process concession requests and non-conformance reports. • Monitor Quality control activities and train workforce where requirements are found. • Liaison with client QC representative, • Development of ITP’s, and Procedures, • Monitors ongoing construction activities to ensure that installation is carried out as per client and ROK standards. Special experience: Construction, pre commissioning and commissioning More 500 items tested (Instrumentation Device, F&G and ESD System Testing, HVAC, Switch Gear, Transformers, Cables, Cathodic protection, Heat Tracing, Protection Earth ) Visual Inspection, Earth testing, IR TESTING, LEAKAGE TESTING, HART, FLUKE 1550B, FLUKE loop calibrator, FLUKE 1587, FLUKE 1625, LRCD 210, DRUCK, SONEL MMR-600, АИП 70, work with testing and calibration tools Work with OEM: Emerson, ABB, Siemens, Yakagawa, AllenBradly, Schneider Electric, etc.

• Verification of construction completion as well as coordination, scheduling and execution of the commissioning program in accordance with the Project Completion Work Plan. Conduct Mechanical/Piping systems/sub-system packages walk downs together with AGIP-KCO HUC-UP Completion Team and generate Punch lists. Reviewing engineering drawings P&IDs, D&D’s and specifications requirements to ensure adequate provisions have been made for testing, flushing, Steam blowing, cleaning and rotating equipment turning, Oil systems circulated flushing, Grease filling and Initial test run other pre-commissioning/commissioning functions. Leading and participating in brainstorming sessions and other team meetings intended to define design priorities and performance goals based on client objectives. Maintain commissioning and start-up records. Utilize the safety tagging and lockout procedure/process. Assist in the planning, scheduling and performance of equipment during the commissioning and start-up. Work closely with AGIP-KCO HUC UP on-site personnel’s and completion representatives engaged in pre-commissioning and troubleshooting activities. • Mechanical seal, impeller, shaft, coupling, gearbox and bearing inspection /overhaul/ installation and alignment of pumps, compressors, air blower, air coolers and rotary parts of mechanical systems. Borescope and stethoscope inspections for machine internals. • Working directly with Nuovo Pignone, GE, Thermodyn, Voith, John Crane vendor technicians/engineers • Commissioning and maintenance activities of equipment’s for OGS, FGC and SGCs areas: pumps, compressors, air and oil coolers, blowers, turbines, fire station equipment’s, mixers and oil storage tanks • Was transferred from Equipment Preservation Project to Commissioning & Start Up project as mechanical technician. The scope of works include: • Pumping scope: full cycle of alignment and adjustment/setting - up of various industrial pumps: centrifugal, rotary, piston type. etc. • Various mechanical and technological equipment: different industrial Large-scale compressors (gas air etc.), pressure vessels and etc. Full range of adjustment & lining up, repair and requirements works to commission and startup of the above equipment to full operability conditions for the operation of the whole "Bolashak" onshore complex. • Completed routine maintenance, fault diagnosis and corrective maintenance of rotating Equipment and associated Control Systems. System owner for Rotating Equipment • Experienced in air coolers, Pump, and compressors lubrication, 1 hour no load run and 4-hour load run tests. Experienced in mechanical isolation and de-isolation of pipes and log out/tag out procedures. • Complete RCA work following failure events or operating problems. Ensure Safety Critical Routines are completed on time and compliance targets are met Carry out mechanical isolations, depressurizing and cleaning of equipment required for maintenance. Purging and de-isolating ensuring all work permits have been cleared before handing over to production. Carry out front line maintenance on all Rotating Equipment. Where defects are identified a work order is raised in CMMS. Assist and work directly with operations Technicians as required. Completion of comprehensive shift handovers. • Conversant with power generation, gas turbines, centrifugal/reciprocating compressors. Ensure that plant and equipment is maintained according to compliance and integrity standards in order to meet expected Reliability and 'uptime' Key Performance Indicators. Liaise closely with Production Operations, Maintenance and Engineering teams in activity planning, engineering change. Ensure that procedures for the safe execution of tasks are in place and adhered to (including Task Instructions, Permits-to Work, Task Risk Assessments, Toolbox Talks). Ensure that all activities are accurately recorded in the maintenance management system, providing all necessary reports to the Operations support team. Participate in Emergency Response organization as required. Special experience: Rotalign Ultra, JIM procedure, Log Out Tag Out. Work with OEM: John Crane, Flowserve, General Electric, ABB, Siemens

• Maintenance Electrical equipment, Boilers, Pumps, Emergency Generators, Elevators(Lift), F&G systems, HVAC Systems • Responsible for the proper functioning of the E&I and mechanical equipment. Development and organization of optimal technological processes using automation. Testing and maintenance of tools. Verification of technical documentation. Planning the placement of equipment and the organization of jobs. Calculation of production capacities and equipment loading. Provision of spare parts, components and materials • Providing, Installation, Commisioning Generators, Boilers and Pump Systems for Schools, Kindergartens, Hospitals and Many Social objects in Atyrau (Buran Boiler, Grundfos, Speroni, Wilo, Baxi, Generator AKSA, GESAN)

• Coordinate / prepare engineering deliverable red-line mark-ups (RLMU) in preparation for handover to Operations (RFSU/RFO). • Support/assist other team members/roles of Gathering Systems Completions Automation department in their activities/duties as required. • Systems Completion Certification Process Model and SC Workflows • Systems Completion Commissioning Procedures • Installation additional Separator, chemical dosing equipment, water vessel, vertical pumps, transformers, Control and automation buildings. • Configure Automatic Albatros, Valve actuators AUMA, F&G systems • Responsible for the proper functioning of the E&I and mechanical equipment. Development and organization of optimal technological processes using automation. Testing and maintenance of tools. Verification of technical documentation. Planning the placement of equipment and the organization of jobs. Calculation of production capacities and equipment loading. Provision of spare parts, components and materials

• Responsible for the proper functioning of the E&I and mechanical equipment. • Development and organization of optimal technological processes using automation. • Testing and maintenance of tools. • Verification of technical documentation. • Planning the placement of equipment and the organization of jobs. • Calculation of production capacities and equipment loading. • Provision of spare parts, components and materials. Implementation of daily quality control of work, identification of defects. • Organization of diagnostics, inspection and repair of similar equipment. • Drawing up technical specifications for the reconstruction of the existing and the creation of new equipment, participation in the development of complex projects of industrial engineering enterprises and in calculating the economic efficiency of implemented projects • Management of Change Processes • Interpreting P&IDs, SRS, RATS and Cause & Effect diagrams • Testing of ESD and F&G systems including SIS Validation procedures • Electrical Single-Line Drawings (SLD) • Livening Up Notice (LUN) Procedure Acts as a Leader in Safety and Environmental Protection.  Contributes to systematic management of Health, Environment and Safety, reliability and productivity aiming to reach world-class indicators and support TCO Operational Excellence Strategy.  Participates/Leads safety meetings.  Conduct Safety audits (LWA, PTW, routine duties, LOTO, etc.).  Participates in IIF and BBS programs.   Proactively uses Stop Work Authority upon observing unsafe behaviours or situations.